Baseball Stats Spreadsheet – Baseball analysts and baseball fans use statistics as the primary way to evaluate players. While conventional statistics still have great influence, new methods of statistical analysis demonstrate great effectiveness in examining and predicting player development. By learning a baseball statistics reading, fanatics can evaluate players for fantasy leagues or simply increase their understanding and appreciation of this sport.
Steps
Image titled Read Baseball Statistics Step 11
Review a standard annotation chart. Scorecards are representations of player development statistics in games and the only ones can be found in the sports section of a newspaper or on a sports website. The tables contain, in the table format, 4 categories of offensive and 6 of launch.
2
Check the alignment of the equipment. The full alignment of the players appears in the offensive or batting section of the scoreboard. Players are listed by batting order, indicating the positions in which they played next to their names. Alternate names appear with the indentation applied under the name of the player they replaced. The 4 categories listed in the offensive table are:
AB: at bat
Image titled Read Baseball Statistics Step 2Bullet1
R: runs scored
Image titled Read Baseball Statistics Step 2Bullet2
H: base hits
Image titled Read Baseball Statistics Step 2Bullet3
RBI: RBIs
Image titled Read Baseball Statistics Step 2Bullet4
3
Examine the most detailed information found under the offensive chart. Individual achievements are noted in this section. (HR) in the season, in the scorecard would appear: HR: Smith (6). Other categories that appear in this section are:
E: errors, LOB: left in base (computer statistics), and DP: double sets (computer statistics).
2B: double, 3B: triple, and HR: quadrangular (with the total of the season).
SB: Stolen bases, SF: Sacrifice flies, and S: Sacrifices.
Method
1
Launch statistics in a scorecard

1
Check the launch statistics. The pitchers are listed in the order they appeared in the game. If a pitcher is assigned a decision in the game (cattle, lost the bran), this is shown next to his name with the letters G, P or S respectively. Next to the disk is recorded his actual record of games won and lost in the number of games saved that has so far. The 6 categories of the launch table are:
IP: Cast Innings: This may imply decimal figures of 0.1 or 0.2, representing part of an inning. For example, a pitcher opener who completed 6 innings and retired a batter at the end would have an IP of 6.1.
Image titled Read Baseball Statistics Step 4Bullet1
H: hits allowed
Image titled Read Baseball Statistics Step 4Bullet2
R: allowed races
Image titled Read Baseball Statistics Step 4Bullet3
ER: allowed strokes
Image titled Read Baseball Statistics Step 4Bullet4
BB: walks
Image titled Read Baseball Statistics Step 4Bullet5
K: strike outs (3 strikes out)
Image titled Read Baseball Statistics Step 4Bullet6
2
Analyze the information of deep launches. An additional listing of launch statistics is listed under the launch table. This may include:
WP: uncontrolled throws, BK: balks, HBP: bases per stroke and PB: last balls (receiver stats).
Image titled Read Baseball Statistics Step 5Bullet1
3
Examine the statistics of the season. Stats statistics include all categories listed in the annotation and important boxes. For example:
OBP: percentage in base. To find a player’s OBP, add your hits (H), bases (BB) and bases per hit (HBP). Then divide that result by the sum of times at bat (AB), bases by balls (BB), bases per stroke (HBP) and sacrificial flies (SF).

Slg: To find the percentage of a player’s slugging, divide their bases reached between their total bases. The bases reached are the sum of your quadrants x 4, triples x 3, doubles x 2, and choose.
Image titled Read Baseball Statistics Step 6Bullet2
Prom: split the number of hits by the AB number. This results in a player’s batting average.
Image titled Read Baseball Statistics Step 6Bullet3
ERA: The ERA’s ERA measures the effectiveness of a pitcher in 9 innings. To find the ERA, divide the thrower allowed RBIs (ER) between their thrown innings (IP) and multiply the result by 9.
Image titled Read Baseball Statistics Step 6Bullet4
4
Investigate other statistical applications. Several methods of statistical analysis in mathematics have emerged in recent decades. While the principles have gained wide acceptance among fans and experts, the following methods also stand out.
OPS: on base + Slugging. Bill James, creator of Sabermetrics, was looking for a simple and accurate way to measure a player’s ability to generate runs. After recording OPS numbers in hundreds of players for many years, the effectiveness of the method in determining the value of a player for his team was recognized. The average OPS of the Major Leagues is 0.728. A baseball superstar scores an OPS of 0.900.
Launch Analysis: Using a variety of complex calculations, Sabermetrics designed innovative methods for analyzing launchers. These unusual formulas and nomenclature methods (BABIP, dera and DIPS) measure the effectiveness of throws, while eliminating the effects of luck and defense and incorporate the effects of approximation.
Method
2
WHIP – Bets allowed and allowed by inning thrown
This statistic shows how many times a pitcher is allowed to reach base in an inning. Many experts consider it a more accurate formula than ERA to qualify the pitchers’ performance.

1
Add the walks (BB) and hits (H) for the pitcher on his way out.
2
Divide the total obtained in the previous step by the total number of innings cast. For example:
Kershaw has no walks and a hit in 7 innings, gets 1/7 = 0.143 WHIP. If that success were quadruple, its ERA would be 1.28; But if it were only a blow, its ERA would be 0.00, and it does not accurately represent what happened. To show the difference more clearly, let’s say that Kershaw has 3 walks and 4 hits but no run. Your ERA is still 0.00 but your WHIP is now 1.00. You can understand this in two ways.

( Click Image to Enlarge )

See More!

SHARE ON